What is Vinyl Wall Covering?

What is Vinyl?
Vinyl is a product made in the 1920s using petroleum and various chemical products. It has become an important item in many areas (poster, sign making, etc.), including wall coverings. It is a type similar to plastic, but with more environmentally friendly properties.
Vinyl wallpapers are cleanable and have antibacterial properties. Although it has an advantage such as easy cleaning, it cannot be said that it is highly recommended in terms of health.

What Kind of Structure Does Vinyl Have?
It has a tear-proof and impact-resistant structure. Termites etc. It is resistant to external influences. It is a longer lasting and economical method compared to the dyeing process. Also known as erasable wallpaper; It has a convenient structure for deletion.
Thanks to its non-flammable structure, it can be used in many areas. It is a coating material that is important to be used in areas with fire risk.
What are the Color and Pattern Options?
Straight lines are generally used as a pattern.
The color options are quite large.
Recently, the patterns have been greatly increased and the color range has been further expanded. Therefore, its use has become widespread in many fields.

What are the Types of Vinyl?
There are paper and fiber-based varieties.
Vinyls made by the compressed paper method; has a yellowish color. Vinyls produced in this way have the disadvantage of being deformed more easily.
Fiber-based vinyls; It is healthier than paper-based. For easier removal, the back is completely reinforced with cotton. It has a more airy structure.

The Place of Vinyl in Our Lives
Being recyclable is a very important factor for the sustainability of vinyl. In recent years, 453,592 metric tons (1 billion pounds) of vinyl have been recycled in the United States. This figure is very important in terms of environment and price. At the same time, wastage made for manufacturing can be recycled back into the manufacturing process.
Recently, consumers are looking for more linoleum floor covering price alternatives in home design and are paying more attention to this issue. Homeowners now want more than a low-maintenance decor item; It turns to high quality, good-looking models with more color and pattern options. Therefore, they are looking for a way to separate various products from different areas of use and to create a more alternative solution.

How is Vinyl Wall Covering Applied?
Vinyl wallpapers have increased in popularity in recent years due to the width of the color and pattern scale, as well as the ease of cleaning and use. It is preferred for decorative purposes in the range of areas where architects, home owners, upholsterers, designers and crowds of people actively turn.

Before Vinyl Wall Covering Application
Additional information:
There should be no cracks or protrusions on the wall where the application will be made.
There should not be any additional renovation work in the place where the application will be made.
If there is, the application of solid parquet must be done first.
Electrical sockets must be pre-installed.
Baseboards should be installed after wallpapering.

Vinyl Wall Covering Preparation Stages:
Lot (serial) numbers of vinyl wallpaper rolls should be checked.
In the roll cutting process, care must be taken to ensure that the repeat (equivalence of patterns) and lengths are the same.
If any, old wallpapers should be removed and the wall should be smoothed.
It is not recommended to apply a roller on a damp, damp wall.

Vinyl Wall Covering Application Sequences:
Before all the rolls are cut, two lengths should be cut and applied to the wall, and after waiting approximately 60 minutes; If no problems occur, other lengths should be cut and applied.
The application should be started by making it from a sunny wall.
The wallpapers should not overlap or have a gap between them.
If there is an excess of lengths, after the applied length dries, the excess part should be cut with a utility knife.
The back surface of the rolls should be applied to the paper work and the adhesive should be applied to the paper surface. If the back surface of the rolls is fiber (nonwoven), the application should be made by applying the adhesive to the wall.
When adding the adhesive to the water, it should be added in accordance with the instructions for use or the manufacturer’s recommendation and mixed until completely dissolved.

Adhesive should be applied to all lengths one by one and should be waited for 10 minutes during each application. All lengths should be cut at the same time and adhesive should not be applied at the same time.
In order that there is no air gap in the paper applied to the wall; The trowel should be soft enough not to damage the paper. At the same time, the trowel application should be done from top to bottom and from the middle to the sides.
The place where the application is made should not be hot and dry; The air conditioner or window should not be left open.

How to Calculate the Number of Rolls to be Applied?
Room circumference and height are measured, excluding doors and windows.
Square Meters of Wall Covered by a Roll:
The width of the wallpaper roll: 0.53 meters, the length: 10 meters.
The height of an average wall is 2.70 centimeters.
How many sizes can be taken from a roll: Roll length / wall length = 10 meters / 2.7 meters = 3.5 lengths; Considering the pattern repetition, a maximum of 3 lengths can be taken from a roll.
How many lengths can the entire wall be covered: If the wall length is taken as 7 meters; wall length / roll width = 7 / 0.53 = 13.2 length. Round the result to 14.
The total number of rolls required; number of rolls required = total number of lengths / number of lengths that can be taken from one roll = 14 / 3 = 4.7 rolls. Round the result to 5.
The leftover pieces can be used to cover window sills and door tops.